GUNBLADE ASSEMBLY INSTRUCTIONS
Assemble the Blade Pieces:
Glue the five blade pieces together.
Insert the larger wooden rod to provide strength and alignment.
Glue the Gun Housings:
Secure the gun housings together using glue.
Insert Bullets into Cylinder:
Place the bullets into the cylinder.
Apply a small amount of glue to ensure they are securely held.
Align Cylinder with Metal Rod:
Use the small metal rod as a guide for proper alignment when assembling the cylinder.
Attach the Handle:
Guide the rectangular peg on the handle into the housing.
Glue the handle in place.
Assemble the Pendants:
Glue the pendants together securely.
Snap and Glue Handle Flaps:
Snap the handle flaps onto the core.
Glue them securely.
Insert and Glue Small Screws:
Insert the small screws into their designated places.
Apply glue to hold them firmly.
Final Note
Ensure all components are properly aligned and allow the glue to dry thoroughly at each step before proceeding to the next for a sturdy and well-assembled product.
ADDITIONAL MATRIALS NEEDED
One wooden dowel with a 3/8 inch diameter and a length of 28” 7/8 inches.
One metal rod with a 3/16 inch diameter and a length of 7” 5/16 inches.
Glue (Cyanoacrylate-Based Resin)